Series P

Thanks to their up to 1000W power, the DC servo motors of the P series are especially suitable for the use in general mechanical engineering, since they can also be used in high-power applications, e.g. in grinders. They are thereby precise in speed and temperature-stable.


They are especially durable and reliable and can therefore be used economically. For special applications, they are available up to IP68.

Specification

Type

 

Rated Power

(S1)

Rated Voltage

VDC

Rated Torque

Nm

Rated Speed

min-1

Rated Current

A

P     50

50300,1340002,8

P   100

80300,2040004,0

P   140

94370,3030003,0

P   310

170500,5530004,8

P   510

235500,7530005,8

P   610

350501,2030009,0

P   810

520801,7030008,5

P 1000

520693,0017008,4

P   910

7501322,5030007,1

P 1510

10001403,50300010,0

Type

Peak Current

A

Voltage constant

V/1000min-1

Torque constant

Nm/A

Armature Resistance

Ohm

P     508,46,00,041,6

P   100

12,06,00,051,0
P   1409,010,00,101,5
P   31014,415,00,111,6
P   51017,415,00,141,2
P   61027,015,00,130,8
P   81025,5250,201,6
P 100025,2350,351,1
P   91021,3400,351,3
P 151030,0400,351,1

Type

Current Constant

V/1000min-1

Armature resistance

Ohm

Ripple Factor

%

P     5014951,5

P   100

14951,5
P   14014951,5
P   31014561,5
P   51014561,5
P   61014561,5
P   81014561,5
P 100014561,5
P   91014561,5
P 151014561,5

 

 

 

 

 

Type

Brake Voltage

VDC

Brake Torque

Nm

Breaking Capacity

W

Weight with Brake

Kg

P     50----

P   100

----
P   140----
P   310240,7154,1
P   510240,7154,7
P   610240,7155,3
P   810241,2158,0
P 1000241,0157,9
P   910241,4158,4
P 1510241,41513,0
Accessories and additional components
Zubehör und Anbaukomponenten für Motoren

Gears

Gear unit PLE series planetary gears can be supplied for all motors. A classification and detailed description of the gear units for the individual motor types can be found here

 


Brakes
These refer to permanent agnet holding brakes with a supply voltage of 24V. The brakes are described in detail in the brakes section.

 


Encoders
There re 2 encoders available:

Type 1: 2-canal encoder with a pulse count of 500 or 1000 Imp/U.

Type 2: 6-canal encoder with a pulse count of 500 or 1000 Imp/U.

Both with a 5V signal

 


Tachos

The tachos are permanent magnet tachogenerators. The rotor of the tacho is tied positively with the shaft,  so the motor speed can be used unaltered as is for the tachogenerator.

We use silvergraphite for the coal brushes.

Dteailed technical description and special designs on request.

 

Bonnet

For the protection of the second shaft a bonnet is available.

 


DC servo regulators
An assignment of the regulators to the motor types and a description of the regulators can be found in the section Servoregulators.

 

 

Standard design:

 
Electrical plug connections
Protection classification IP 40
Insulation class F
Optionally, with or without a second shaft end
Colour grey hammertone
Ball bearing in the 2Z design

Special design:

 

Electrical connection with 1m cable

Special voltages

Motor shaft and connecting flange according to the client drawing

Protection classification IP 55

 

Remarks


Tolerances according to VDE 0530.

A tolerance of +/-10% is applicable for values not specified according to VDE 0530.
In case of the IP 55 execution, a slightly lower torque should be expected on account of frictional losses due to the integration of shaft seals.
The technical specifications given in the table refer to DC voltage supply with a permissible harmonic content of up to 5%.
The specifications are applicable only for the use at an ambient temperature of 0°C to 40°C. This range should neither be undershot nor exceeded, since there is otherwise the risk of permanent magnet weakening.